Configurar el NAT NSX Edge (EN)
Using NAT rules to redirect traffic
Last updated 26th November 2021
Objective
NAT stands for network address translation. It’s a way to map multiple addresses to a single one.
There are two types of NAT:
- DNAT stands for Destination NAT. It modifies the destination address and is used for inbound traffic.
- SNAT stands for Souce NAT. It modifies the source address and is used for outbound traffic.
This guide explains how to create NAT rules.
Requirements
- being an administrative contact of your Hosted Private Cloud infrastructure to receive login credentials
- a user account with access to vSphere as well as the specific rights for NSX (created in the OVHcloud Control Panel)
- a deployed NSX Edge Services Gateway
Instructions
Interface access
In the vSphere interface menu, go to the Networking and Security dashboard.
On the left side, navigate to the NSX Edges section then click on the appliance you're setting up.
Go to the NAT tab.
DNAT
Click + Add and select Add DNAT Rule.
Set the parameters as follows:
- the interface the traffic will come from (for DNAT, your public facing interface)
- the protocol and possibly sub-protocol targeted
- the source IP or IP range
- if applicable, the source port
- the original destination IP (typically, your public facing IP)
- if applicable, the original port targeted
- the translated destination IP or IP range
- enable or disable the rule
- enable or disable logs on the rule
Click Add.
SNAT
Click + Add and select Add SNAT Rule.
Set the parameters as follows:
- the interface the traffic will be sent out of
- the protocol and possibly sub-protocol targeted
- the source IP or IP range
- if applicable, the source port
- the destination IP or IP range
- if applicable, the destination port
- the translated source IP or IP range
- enable or disable the rule
- enable or disable logs on the rule
Click Add.
Publish
Rules created or modified will not be registered and active until you click the Publish button.
The rules you created are now functional.
Go further
Join our community of users on https://community.ovh.com/en/.
¿Le ha resultado útil esta guía?
Si lo desea, también puede enviarnos sus sugerencias para ayudarnos a mejorar nuestra documentación.
Imágenes, contenido, estructura...: ayúdenos a mejorar nuestra documentación con sus sugerencias.
No podemos tratar sus solicitudes de asistencia a través de este formulario. Para ello, haga clic en "Crear un tíquet" .
¡Gracias! Tendremos en cuenta su opinión.