Last updated 25th May 2021
.platform.app.yaml file provides a number of ways to control how an application gets turned from a directory in Git into a running application. There are three blocks that control different parts of the process: the build flavor, dependencies, and hooks. The build process will run the build flavor, then install dependencies, then run the user-provided build hook. The deploy process will run the deploy hook.
build defines what happens when building the application. Its only property is
flavor, which specifies a default set of build tasks to run. Flavors are language-specific.
In all languages, you can also specify a flavor of
none (which is the default for any language other than PHP and Node.js); as the name suggests it will take no action at all. That is useful when you want complete control over your build steps, such as to run a custom Composer command or use an alternate Node.js package manager.
build: flavor: none
It is also possible to install additional system-level dependencies as part of the build process. These can be installed before the
build hook runs using the native package manager for several web-focused languages.
Web PaaS supports pulling any dependencies for the following languages:
- PHP (via Composer)
- Python 2 and 3 (via Pip)
- Ruby (via Bundler)
- Node.js (via NPM)
- Java (via Apache Maven, Gradle, or Apache Ant)
Applications can have both Python 2 and Python 3 dependencies, using the version of each that is packaged with the most recent Debian distribution. The format of Python dependencies complies with PEP 394. That is, specifying a dependency in a
python2 block will use
pip2 and Python 2, while specifying a dependency in a
python3 block will use
pip3 and Python 3.
We suggest that you specify your dependencies with the specific version of Python you wish to use (i.e. either
python3), rather than with the generic
python declaration, to ensure your application will function normally in the future if Debian's default version of Python changes.
Build dependencies are independent of the eventual dependencies of your application and are available in the
PATH during the build process and in the runtime environment of your application. Note that in many cases a given package can be installed either as a global dependency or as part of your application's own dependencies. In such cases it's up to you which one to use.
You can specify those dependencies as shown below:
dependencies: php: # Specify one Composer package per line. drush/drush: '8.0.0' python: # Specify one Python 2 package per line. behave: '*' python2: # Specify one Python 2 package per line. requests: '*' python3: # Specify one Python 3 package per line. numpy: '*' ruby: # Specify one Bundler package per line. sass: '3.4.7' nodejs: # Specify one NPM package per line. pm2: '^4.5.0'
Note that the package name format for each language is defined by the package manager used; similarly, the version constraint string will be interpreted by the package manager. Consult the appropriate package manager's documentation for the supported formats.
Web PaaS supports three "hooks", or points in the deployment of a new version of an application that you can inject a custom script into. Each runs at a different stage of the process.
Each hook is executed as a single script, so they will be considered failed only if the final command in them fails. To cause them to fail on the first failed command, add
set -e to the beginning of the hook. If a build hook fails for any reason then the build is aborted and the deploy will not happen.
The "home" directory for each hook is the application root. If your scripts need to be run from the doc root of your application, you will need to
cd to it first; e.g.:
hooks: build: | set -e cd web cp some_file.php some_other_file.php deploy: | update_schema.sh post_deploy: | set -e import_new_content.sh clear_cache.sh
| character tells YAML that the lines that follow should be interpreted literally as a newline-containing string rather than as multiple lines of YAML properties.
Hooks are executed using the dash shell, not the bash shell used by normal SSH logins. In most cases that makes no difference but may impact some more involved scripts.
build hook is run after the build flavor (if any). At this point no services (such as a database) are available nor any persistent file mounts, as the application has not yet been deployed. Environment variables that exist only at runtime such as
PLATFORM_DOCUMENT_ROOT etc. are not available during this phase. The full list of build time and runtime variables is available on the variables page. There are three writeable directories at this time:
$PLATFORM_APP_DIR- This is where your code is checked out, and is the working directory when the build hook starts. The contents of this directory after the build hook is what will be "the application" that gets deployed. (This directory is always
/app, but it's better to use the variable or rely on the working directory than to hard code that.) Most of the time, this is the only directory you use.
$PLATFORM_CACHE_DIR- This directory persists between builds, but is NOT deployed as part of your application. It's a good place for temporary build artifacts, such as downloaded
.zipfiles, that can be reused between builds. Note that it is shared by all builds on all branches, so if using the cache directory make sure your build code accounts for that.
/tmp- The temp directory is also useful for writing files that are not needed in the final application, but it will be wiped between each build.
There are no constraints on what can be downloaded during your build hook except for the amount of disk available at that time. Independent of the mounted disk size you have allocated for deployment, build environments (the application plus the cache directory) and therefore application images are limited to 4 GB during the build phase. If you exceed this limit you will receive a
No space left on device error. It is possible to increase this limit in certain situations, but it will be necessary to open a support ticket in order to do so.
deploy hook is run after the application container has been started, but before it has started accepting requests. You can access other services at this stage (MySQL, Solr, Redis, etc.). The disk where the application lives is read-only at this point. Note that the deploy hook will only run on a
web instance, not on a
Be aware: The deploy hook blocks the site accepting new requests. If your deploy hook is only a few seconds then incoming requests in that time are paused and will continue when the hook completes, effectively appearing as the site just took a few extra seconds to respond. If it takes too long, however, requests cannot be held and will appear as dropped connections. Only run tasks in your deploy hook that have to be run exclusively, such as database schema updates or some types of cache clear. A post-deploy task that can safely run concurrently with new incoming requests should be run as a
post_deploy hook instead.
After a Git push, in addition to the log shown in the activity log, you can see the results of the
deploy hook in the
/var/log/deploy.log file when logged in to the environment via SSH. It contains the log of the execution of the deployment hook. For example:
[2014-07-03 10:03:51.100476] Launching hook 'cd public ; drush -y updatedb'. My_custom_profile 7001 Update 7001: Enable the WebPaas module. Do you wish to run all pending updates? (y/n): y Performed update: my_custom_profile_update_7001 'all' cache was cleared. Finished performing updates.
post_deploy hook functions exactly the same as the
deploy hook, but after the container is accepting connections. That is, it will run concurrently with normal incoming traffic. That makes it well suited to any updates that do not require exclusive database access.
What is "safe" to run in a
post_deploy hook vs. in a
deploy hook will vary by the application. Often times content imports, some types of cache warmups, and other such tasks are good candidates for a
post_deploy hook logs to its own file in addition to the activity log,
How do I compile Sass files as part of a build?
As a good example of combining dependencies and hooks, you can compile your Sass files.
Let's assume that your application has Sass source files in the
web/styles directory. That directory also contains a
package.json file for npm.
The following blocks will download a specific version of Sass, then during the build step will call a
build-css npm script to proceed with the Sass files compilation. This assumes that you have a
build-css npm script set up to run
sass, be it with a tool such as webpack or using the binary directly.
dependencies: nodejs: sass: "^1" hooks: build: | npm install npm run build-css
How can I run certain commands only on certain environments?
post_deploy hooks have access to all of the same environment variables as the application does normally, which makes it possible to vary those hooks based on the environment. A common example is to enable certain modules only in non-production environments. Because the hook is simply a shell script we have full access to all shell scripting capabilities, such as
The following example checks the
$PLATFORM_BRANCH variable to see if we're in a production environment (the
master branch) or not.
hooks: deploy: | if [ "$PLATFORM_BRANCH" = master ]; then # Run commands only when deploying on master else # Run commands only when deploying on dev environments fi # Commands to run regardless of the environment
Did you find this guide useful?
Please feel free to give any suggestions in order to improve this documentation.
Whether your feedback is about images, content, or structure, please share it, so that we can improve it together.
Your support requests will not be processed via this form. To do this, please use the "Create a ticket" form.
Thank you. Your feedback has been received.