Configuring an additional disk
Find out how to add and configure additional storage space on a VPS
Last updated 15th February 2023
Objective
With OVHcloud Virtual Private Servers you have the possibility to add a secure storage space as a service option. This storage is separated from the internal storage capacity of the VPS solution which makes it a secure place for your backups or other static data. The additional disk will only be accessible from the server's IP address and data stored on it will remain unaffected, even if the VPS is reinstalled or should suffer data loss.
This guide explains how to enable the additional disk option and configure the storage space for use with the VPS.
Requirements
- A VPS in your OVHcloud account
- Access to the OVHcloud Control Panel
- Administrative access via SSH or RDP to your VPS
Instructions
Log in to the OVHcloud Control Panel, go to the Bare Metal Cloud section and select your server from Virtual Private Servers.
Subscribing to the additional disk option
After selecting your VPS, click on the Additional disk tab in the horizontal menu. Click on Order an additional disk and choose a disk size from the selection that appears.
Take note of the pricing information, then click on Order. You will be guided through the order process and receive a confirmation email as soon as the disk is installed.
Mounting the new storage space
OVHcloud is providing you with services for which you are responsible, with regard to their configuration and management. You are therefore responsible for ensuring they function correctly.
If you encounter any difficulties performing these actions, please contact a specialist service provider and/or discuss the issue with our community on https://community.ovh.com/en/. OVHcloud cannot provide you with technical support in this regard.
On a Linux VPS
If a GNU/Linux distribution is installed on your VPS, establish an SSH connection to your server from the command line terminal or by using a SSH client application.
The examples below presume you are logged in as a user with elevated permissions.
You can use the following command to verify the name of the new device:
$ lsblk
sda 8:0 0 80G 0 disk
├─sda1 8:1 0 79.9G 0 part /
├─sda14 8:14 0 4M 0 part
└─sda15 8:15 0 106M 0 part /boot/efi
sdb 8:16 0 50G 0 disk
In this example, the additional disk is named sdb.
Execute fdisk to create a partition on the disk; when prompted, enter n for a new partition and accept the subsequent defaults by pressing Enter. Finally, use the w command to write the changes to the disk.
$ sudo fdisk /dev/sdb
Welcome to fdisk (util-linux 2.34).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): n
Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p):
Partition number (1-4, default 1):
First sector (2048-104857599, default 2048):
Last sector, +/-sectors or +/-size{K,M,G,T,P} (2048-104857599, default 104857599):
Created a new partition 1 of type 'Linux' and of size 50 GiB.
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
Now that the partition sdb1 is created, you can format it with ext4:
$ sudo mkfs.ext4 /dev/sdb1
Creating filesystem with 13106944 4k blocks and 3276800 inodes
Filesystem UUID: a667d351-cf36-49f2-94b4-daf03d7a86a6
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424
Allocating group tables: done
Writing inode tables: done
Creating journal (65536 blocks): done
Writing superblocks and filesystem accounting information: done
The final step is to mount the disk:
$ sudo mkdir /mnt/disk
$ sudo mount /dev/sdb1 /mnt/disk
You can see in the last line that the additional disk is now mounted at /mnt/disk:
$ df -h
Filesystem Size Used Avail Use% Mounted on
udev 1.9G 0 1.9G 0% /dev
tmpfs 385M 1.1M 384M 1% /run
/dev/sda1 78G 2.4G 75G 4% /
tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/sda15 105M 3.9M 101M 4% /boot/efi
/dev/loop1 68M 68M 0 100% /snap/lxd/18150
/dev/loop3 32M 32M 0 100% /snap/snapd/10707
/dev/loop4 56M 56M 0 100% /snap/core18/1944
/dev/loop5 70M 70M 0 100% /snap/lxd/19188
tmpfs 385M 0 385M 0% /run/user/0
/dev/loop6 56M 56M 0 100% /snap/core18/1988
/dev/loop2 32M 32M 0 100% /snap/snapd/11036
tmpfs 385M 0 385M 0% /run/user/1000
/dev/sdb1 49G 53M 47G 1% /mnt/disk
This previous step is not persistent because the disk will be detached if the VPS is restarted. In order to automate the mounting process, the fstab file needs to be edited.
First, retrieve the UUID (block ID) of the device:
$ sudo blkid
/dev/sda1: LABEL="cloudimg-rootfs" UUID="e616a2cd-3c02-4c79-9823-9b1bb5c13b26" TYPE="ext4" PARTUUID="a44089a3-f407-41e6-b7a5-1ed7672cef20"
/dev/sda15: LABEL_FATBOOT="UEFI" LABEL="UEFI" UUID="4411-1580" TYPE="vfat" PARTUUID="e1746ac7-80c1-4859-9b4d-fa6ce11b3ae9"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/sda14: PARTUUID="7d19a2c9-75df-443e-8301-0bb85931df7d"
/dev/sdb1: UUID="87571b68-30e1-498b-a64c-49ec5cd4f31c" TYPE="ext4" PARTUUID="c965cbdf-01"
Open /etc/fstab with a text editor:
$ sudo nano /etc/fstab
Add the line below to the file and replace the UUID with your own:
UUID=87571b68-30e1-498b-a64c-49ec5cd4f31c /mnt/disk ext4 nofail 0 0
Save and exit the editor. The disk should be automatically mounted after every reboot from now on.
On a Windows VPS
If a Windows OS is installed on your VPS, establish a remote desktop (RDP) connection to your server.
Once logged in, right-click on the Start Menu button and open Disk Management.
The new disk will be displayed as an unknown volume with unallocated space.
If the disk is marked as offline here, it needs to be initialised first. You can use the Windows GUI or the DISKPART utility to achieve this. Otherwise, proceed with formatting the disk in Disk Management.
Initialising the disk in Disk Management
Right-click on the disk and select Online.
Then right-click on the disk again and this time select Initialise Disk.
Select MBR in the new window and click OK.
Initialising the disk with DISKPART
Right-click on the Start Menu button and open Run.
Type cmd and click OK to open the command line application.
At the command prompt, open DISKPART:
C:\> diskpart
Use the following series of DISKPART commands to set the disk to online:
DISKPART> san
SAN Policy : Offline Shared
DISKPART> san policy = OnlineAll
DiskPart successfully changed the SAN policy for the current operating system.
- Implementation of the strategy on the extra disk:
[Code] DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 200 GB 0 B
* Disk 1 Offline 10 GB 1024 KB
DISKPART> select disk 1
Disk 1 is now the selected disk.
DISKPART> attributes disk clear readonly
Disk attributes cleared successfully.
DISKPART> attributes disk
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
DISKPART> online disk
DiskPart successfully onlined the selected disk.
Formatting the disk
In Disk Management, right-click on the new disk and select New Simple Volume....
In the wizard, click Next to specify the volume size. It should be set to maximum by default. Click Next to continue.
Leave the new drive letter at default or select a different one, then click Next.
Label the volume (optional) and confirm the formatting options by clicking Next.
In the last window, click Finish to format the disk. It will be available as a drive in File Explorer after the operation.
Cancelling the additional disk option
From the Home tab, scroll down to the box labelled Summary of options. Click on ... next to the option "Additional disks" and in the context menu click on Cancel.
Go further
Join our community of users on https://community.ovh.com/en/.
Did you find this guide useful?
Please feel free to give any suggestions in order to improve this documentation.
Whether your feedback is about images, content, or structure, please share it, so that we can improve it together.
Your support requests will not be processed via this form. To do this, please use the "Create a ticket" form.
Thank you. Your feedback has been received.